How to Replace a Pump in a Samsung Washing Machine
Posted: Tue Feb 18, 2025 9:56 am
In Samsung devices it is located under the front cover.
We remove the front cover panel.
We determine the exact location of the heating device. As a rule, the heating element is located under the tank, at the bottom of the mechanism. Carefully disconnect all the wires leading to the heating element.
At the same time, we mark them with a marker so as not to get confused later when reconnecting. We loosen the fastenings of the heating device.
Carefully dismantle the heating element, trying not to touch the other elements of the mechanism. Clean the place where the heating element was located from scale residues. Install a new heating device.
The design features of Samsung washing machines allow you to repair them not only without unnecessary hassle, but also with your own hands.
Before starting repairs, it is necessary to free the machine spain telegram data from all communications - disconnect it from the power supply and sewerage system, disconnect the pump motor wires.
Then you need to remove the assembly fasteners and remove the pump from the car.
A visual assessment of the pump's condition is carried out after it has been cleaned and makes it possible to determine the need for its repair or replacement.
If a replacement is still necessary, the procedure should be as follows:
unscrew the screws on the back panel and remove the top cover;
we take out the powder dispenser;
open the filter cover located in the bottom panel;
After unscrewing the screws, remove the bottom panel by moving it to the right;
unscrew the 4 screws located under the panel;
open the hatch, loosen the clamp, remove the cuff;
unscrew 3 bolts under the top panel, remove the front wall;
unscrew the 3 bolts connecting the pump snail and the body;
disconnect the pump from the electrical circuit;
unscrew the pump from the filter;
We install a new pump.
The machine is assembled in reverse order. For ease of repair, the machine can be laid on its left side.
We remove the front cover panel.
We determine the exact location of the heating device. As a rule, the heating element is located under the tank, at the bottom of the mechanism. Carefully disconnect all the wires leading to the heating element.
At the same time, we mark them with a marker so as not to get confused later when reconnecting. We loosen the fastenings of the heating device.
Carefully dismantle the heating element, trying not to touch the other elements of the mechanism. Clean the place where the heating element was located from scale residues. Install a new heating device.
The design features of Samsung washing machines allow you to repair them not only without unnecessary hassle, but also with your own hands.
Before starting repairs, it is necessary to free the machine spain telegram data from all communications - disconnect it from the power supply and sewerage system, disconnect the pump motor wires.
Then you need to remove the assembly fasteners and remove the pump from the car.
A visual assessment of the pump's condition is carried out after it has been cleaned and makes it possible to determine the need for its repair or replacement.
If a replacement is still necessary, the procedure should be as follows:
unscrew the screws on the back panel and remove the top cover;
we take out the powder dispenser;
open the filter cover located in the bottom panel;
After unscrewing the screws, remove the bottom panel by moving it to the right;
unscrew the 4 screws located under the panel;
open the hatch, loosen the clamp, remove the cuff;
unscrew 3 bolts under the top panel, remove the front wall;
unscrew the 3 bolts connecting the pump snail and the body;
disconnect the pump from the electrical circuit;
unscrew the pump from the filter;
We install a new pump.
The machine is assembled in reverse order. For ease of repair, the machine can be laid on its left side.