Power section of the impact instrument
Posted: Tue Feb 18, 2025 7:10 am
Perforator device
There are few users of the tool who have studied not only the order of pressing the levers and buttons, but also understand what happens in the mechanism as a result of the received command. Without knowing the interaction of the units, it is impossible to perform even the smallest repair of the hammer drill.
There are signs of malfunctions that relate to the power section, and sometimes mechanical wear or breakage of parts occurs.
Electrical circuits and equipment are concentrated in one part and are presented in a section in the photo.
Signs of a malfunction requiring replacement of parts or repair belgium telegram data of the hammer drill in the power section may be the following:
when the device is turned on, the network fuses are triggered;
the device does not turn on;
smoke with a pungent odor appears during operation;
the device sparks when operating;
The speed is not adjustable.
You can find the reason why the device does not turn on using a tester. You need to look for a break in the circuit, from simple to complex. Check connections, clean contacts. The most complex and expensive part that has failed may be the hammer drill anchor. This is the heart of the engine, made up of copper coils connected to each other and fastened with lamellas. In the event of a breakdown of insulation between the wires, a short circuit occurs anywhere, and the entire collector needs to be rewound or replaced.
You can determine that the anchor on the hammer drill is faulty visually by the burnt winding, traces of smoke on the lamellas, or by testing for a short circuit. Damage can be eliminated by timely maintenance, cleaning the parts from dust, which is the root cause of all troubles. If sparking comes from the engine, the anchor must be cleaned with an alcohol swab or an ordinary school eraser to remove graphite plaque from the collector.
There are few users of the tool who have studied not only the order of pressing the levers and buttons, but also understand what happens in the mechanism as a result of the received command. Without knowing the interaction of the units, it is impossible to perform even the smallest repair of the hammer drill.
There are signs of malfunctions that relate to the power section, and sometimes mechanical wear or breakage of parts occurs.
Electrical circuits and equipment are concentrated in one part and are presented in a section in the photo.
Signs of a malfunction requiring replacement of parts or repair belgium telegram data of the hammer drill in the power section may be the following:
when the device is turned on, the network fuses are triggered;
the device does not turn on;
smoke with a pungent odor appears during operation;
the device sparks when operating;
The speed is not adjustable.
You can find the reason why the device does not turn on using a tester. You need to look for a break in the circuit, from simple to complex. Check connections, clean contacts. The most complex and expensive part that has failed may be the hammer drill anchor. This is the heart of the engine, made up of copper coils connected to each other and fastened with lamellas. In the event of a breakdown of insulation between the wires, a short circuit occurs anywhere, and the entire collector needs to be rewound or replaced.
You can determine that the anchor on the hammer drill is faulty visually by the burnt winding, traces of smoke on the lamellas, or by testing for a short circuit. Damage can be eliminated by timely maintenance, cleaning the parts from dust, which is the root cause of all troubles. If sparking comes from the engine, the anchor must be cleaned with an alcohol swab or an ordinary school eraser to remove graphite plaque from the collector.