You should not cut corners but opt ​​for high

[akbhasan185]

Avoid problems with lighting control Even if the control signals are subject to a standard, that doesn't mean that problems can't arise. Beginners in particular are not very satisfied with the result of the lighting control after putting the system together . A common problem is the cabling. You have invested in a high-quality system and, during the first test run, you find that the performance of the DMX controllers does not meet your expectations. If you have invested in good equipment, the cabling could be the reason for the problems.


Many beginners decide to buy a high-quality system and use a classic AUX cable croatia phone number library for the wiring. This basically works. However, the audio cable is constructed differently from the DMX cable. It is simply designed for a different purpose. For this reason, it is important that you invest in a high-quality cable in addition to the DMX software and the powerful DMX controller. With the wiring, you create the basis for connecting all components.


-quality components in this area too. It will definitely pay off. Creating an optimal DMX line In addition to buying high-quality cables, it is important to set up the DMX line optimally. Make sure that you use a so-called DMX terminator at the end of the DMX line. This term refers to the connection resistance that is connected to the last DMX out of the line. This plug should have a resistance of 120 ohms and be soldered between the second and third PIN.